Cutting Software

OffCut vs OpenCutList, OptiCutter, CutList Plus (2026)

OffCut vs OpenCutList, OptiCutter, CutList Plus (2026)

Short answer: OffCut is a free panel (2D) cutting optimiser that runs in your browser and in an iPhone and iPad app, limited to 2 stock panels and 20 pieces per project on the free plan. OpenCutList is a free, open-source SketchUp extension: the better choice if you already model your furniture in SketchUp, while OffCut starts from a typed list of parts, with no 3D model. CutList Plus is a one-time-purchase Windows program, OptiCutter has the most generous free limits and also does linear (1D) cutting, and Cutplan is a free, offline-capable web app. Prices and limits below were checked on each vendor’s site on 4 and 10 November 2026.

Comparison table

ToolRuns onFree planPaidGood fit
OffCutBrowser; iPhone and iPad app (App Store)2 projects, 2 stock panels, 20 pieces; first 5 result panels shown in fullPro €9.90/month, €49/year or €199 lifetime (pricing)Panel cut lists, grain direction, weight per part
OpenCutListSketchUp extension (SketchUp 2017 to latest; Windows and macOS)Open source (GPL v3); no subscription or licence key, funded by donationsNone for the extension; it needs SketchUpFurniture already modelled in SketchUp
OptiCutterBrowserPer plan: 5 stock sizes, 20 part sizes, 500 parts (1D and 2D); PDF, XLS, CSV, DXF exportStandard €9/month, Professional €19/month, API €99/monthLinear lumber (1D) and large jobs on the free plan
CutplanBrowser, installable, works offlineUnlimited calculations, 3 saved projectsPro $9.99/month (waitlist shown)Workshops with poor connectivity
CutList PlusWindows desktopFree trial (length not stated)One-time: Silver $89 (50 parts), Gold $249, Platinum $499 (adds DXF)Professional shops that want pricing and proposals
Cutlist OptimizerBrowserCapped; limits not published on the pageSingle payment of 4.90 (shown as $4.90 and 4.90€ on the page) unlocks 3 daysQuick one-off jobs

Sources: opencutlist.org and its GitHub page (10 November 2026), opticutter.com, cutplan.app, cutlistplus.com, cutlistoptimizer.com, consulted 4 November 2026 (Cutplan and Cutlist Optimizer prices rechecked 10 November). Vendors change plans often: check the vendor page before buying. A “not published” means we could not find it, not that it does not exist.

OffCut versus each alternative

OffCut vs OptiCutter

OptiCutter’s free plan is larger than ours (500 parts against 20 pieces) and it handles linear stock such as bars and mouldings, which OffCut does not. Choose it for 1D jobs or long part lists. OffCut shows the weight of each part and of the project, and works with panel grain direction; see the wood weight calculator for the method.

OffCut vs OpenCutList

OpenCutList is free and open source, and it does a lot: from a SketchUp model it produces the cut list, cutting diagrams, labels, and cost and weight estimates. Its own site describes the workflow as “design your furniture in SketchUp, then get its cutlist”, and it reads plain SketchUp groups and components. If your project is already modelled in SketchUp, use it: your parts are already defined and nothing needs retyping.

OffCut starts one step later. You type the list of parts (width, height, quantity, grain direction) and your stock sheet, with no 3D model and no installation, in the browser or in the iPhone and iPad app. That is the quicker path for a list written on a plan, a sketch or a client’s order, or when you are in the workshop with a phone. It is also where the limits differ: OffCut’s free plan stops at 2 stock panels and 20 pieces per project, and OpenCutList’s own pages do not state such caps. The two are not exclusive: you can take the part sizes from your SketchUp cut list, enter them in OffCut and compare the layouts.

OffCut vs Cutplan

Cutplan runs offline from the browser, even on its free plan, and has no calculation cap. If your workshop has no reliable connection, that settles it. OffCut’s free plan caps stock panels and pieces per project but keeps no monthly calculation counter.

OffCut vs CutList Plus

CutList Plus is Windows-only software bought once ($89 to $499 depending on edition; DXF export only in Platinum), with pricing and proposal tools for professional shops. OffCut needs no install and costs nothing for small jobs, but offers no costing or proposals.

OffCut vs Cutlist Optimizer

Both run in the browser and both cap the free use. Cutlist Optimizer does not publish its limits on its home page, so compare on a real project: enter the same parts in both and look at the number of sheets used and the waste.

Test it on a real cut list

A small bookcase: 2 sides 720 x 560 mm, 3 shelves 764 x 300 mm, 1 back 764 x 720 mm. Open these pieces in OffCut (on iPhone and iPad you can also use the App Store app), add your stock panel (for example 2440 x 1220 mm), and run the same list in the other tools. The pieces total about 2.04 m² of the 2.98 m² sheet, so one sheet is enough in any tool; the useful comparison is the layout and the exports.

To go deeper: panel cutting layout guide, how the packing algorithms work, calculating offcuts.

FAQ

Is OffCut really free?

The free plan covers 2 projects, 2 stock panels and 20 pieces per project, and shows the first 5 result panels in full. Beyond that, see pricing.

OpenCutList is free. Why use OffCut?

If your parts already exist in a SketchUp model, you probably should not: OpenCutList reads them directly and costs nothing. Use OffCut when you have no 3D model (a typed list is enough), when you want to work on a phone or tablet, or when you want a quick layout without installing anything. The free plan has caps (2 stock panels, 20 pieces per project); see pricing.

Does OpenCutList work without SketchUp?

No. It is a SketchUp extension, so SketchUp must be installed (versions from 2017 to the latest, on Windows and macOS, according to the project’s site). Linux is not listed.

Which tool is best for linear lumber?

OffCut optimises sheets only. OptiCutter lists 1D (linear) optimisation.

Which one works offline?

Cutplan states it works offline. CutList Plus is installed on Windows, and OpenCutList runs inside desktop SketchUp.

Glossary

Offcut
Free open-source web app for cutting-plan optimisation. Multilingual, no signup, runs directly in the browser.
CutList Plus / Optimizer
Historic desktop tools for cut optimisation (Windows). CutList Plus is paid; CutList Optimizer is open-source as a web app.
Cutting plan
Computed optimisation diagram showing how to cut multiple parts from standard panels while minimising waste.
CSV import/export
Standard tabular text format to import a parts list from Excel/Sheets or export the result of a calculation.
Web app vs desktop
A web app (Offcut) runs in any browser without installation, on any OS. A desktop app (CutList Plus) requires local install, often Windows-only.

Questions fréquentes

Is Offcut really free with no hidden limits?

Yes. Offcut is completely free to use with no part limits, no session caps, and no subscription required. You can optimize as many panels and parts as your project needs. PDF export, CSV import, and all optimization algorithms are included at no cost. There is no paid tier — the goal is to give every woodworker access to professional-quality cut planning without financial barriers.

How does Offcut compare to Cutlist Optimizer for a simple plywood project?

For a typical DIY plywood project, Offcut generally performs as well or better than Cutlist Optimizer. The key difference is that Offcut’s full feature set — including PDF export and advanced algorithms — is free, whereas Cutlist Optimizer gates those features behind a paid plan. For quick jobs, both work fine. For anything requiring a printed layout or more than a handful of parts, Offcut is the clearer choice.

Does Offcut work without installing anything?

Absolutely. Offcut runs entirely in your web browser — Chrome, Firefox, Safari, Edge — on desktop, tablet, or mobile. There is no software to download or install. Just open app.offcut.tools, enter your stock panels and required parts, and get your cutting layout immediately.

What wood panels does Offcut support?

Offcut works with any rectangular panel material, including MDF, plywood, OSB, chipboard, melamine-coated boards, and solid wood blanks. You define the dimensions of your stock sheets and your required parts, and the optimizer handles the rest. There is no built-in material database — you simply enter the dimensions you’re working with, keeping it flexible for any project.

Can I import my parts list from a spreadsheet into Offcut?

Yes. Offcut supports CSV and JSON import, so you can prepare your parts list in a spreadsheet (Excel, Google Sheets, LibreOffice Calc) and import it directly. This saves significant time on larger projects and makes it easy to update quantities or dimensions without re-entering everything manually.

Laisser un commentaire

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *